How to Program: 2021-2023 Ford F-150 Elite LED Headlight

Elite LED Headlights were designed for maximum performance and functionality. They include a programmable welcome sequence, daytime running lights, and turn signals. The Elite Max features a high beam boost and low beam assist setting, as well as a show mode and off-road lighting capabilities.

The following programming guide will provide you with instructions for how to program Elite LED Headlights on the 2021-2023 Ford F-150. Be sure to read the Programming Tips to get started, then continue reading for a step-by-step guide!

For a printable .pdf of this programming guide, click here. 

Programming Tips:

• Parking in front of a window or reflective wall makes it easier to see what’s happening!
• While it seems like a lot of information, the programming method follows a standard theme. After just a few minutes, you’ll get the hang of it!
  Please contact Diode Dynamics with any questions.
• Always start with the vehicle off, and with the headlight switch turned to the OFF position. Sometimes, when you enter or exit the truck, the lights will stay on for 10-15 seconds. Wait until all of these lights have turned off.
• To enter any programming mode, you must flash your lights off and back on a specific number of times. If you forget the count, switch the lights off and wait 10 seconds. Then, start again.
• Some programming modes use the high beam stalk to toggle through options. Due to the factory high beam functionality, the high beam may stay on after you reach your desired configuration, even after switching the light switch to OFF. If this is the case, wait 10-15 seconds until the high beams turn off by themselves. If you attempt to turn the high beams off with the stalk, the configuration will not be properly saved.

DRL Color and Style Programming

Step 1 - Turn all lights off, including the off-road switch (if applicable).

Step 2 - Quickly toggle the headlight dial between OFF and PARK three times, leaving it on park the third time.

Step 3 - The DRL will flash three times to indicate you have entered programming mode 3. The current configuration will be displayed.

Step 4 - Using the stalk on your steering wheel, flash your high beam to cycle through DRL styles. Each time you cycle to the next option, the DRL will flash three times, and then display your selection. 

Step 5 - When you've reached the desired DRL style, turn the headlight switch off. If the high beams stay on, wait 10-15 seconds for them to shut off automatically. When all lights have shut off, the configuration will be saved and you have exited programming mode. Repeat this process to select a new configuration. 

Turn Signal Style Programming

Step 1 - Turn all lights off, including the off-road switch (if applicable).

Step 2 - Quickly toggle the headlight dial between OFF and PARK four times, leaving it on park the fourth time.

Step 3 - The DRL will flash four times to indicate you have entered programming mode 4. The current configuration will be displayed.

Step 4 - Using the stalk on your steering wheel, flash your high beam to cycle through turn signal styles. Each time you cycle to the next option, the DRL will flash three times, and then begin flashing in the style you selected. 

NOTE: For styles 2 and 3, the outer DRL does not blink with the turn signal. For these styles, the outer DRL will dim during the day while the turn signal is activated.

Step 5 - When you’ve reached the desired turn signal style, turn the headlight switch off. If the high beams stay on, wait 10-15 seconds for them to shut off automatically. When all lights have shut off, the configuration will be saved and you have exited programming mode. Repeat this process to select a new configuration.

Welcome Sequence On or Off Programming

Step 1 - Turn all lights off, including the off-road switch (if applicable).

Step 2 - Quickly toggle the headlight dial between OFF and PARK five times, leaving it on park the fifth time. 

Step 3 - The DRL will flash five times to indicate you have entered programming mode 5. The current configuration will be displayed.

Step 4 - Using the stalk on your steering wheel, flash your high beam to turn the welcome sequence on or off. It is on by default. The DRL will flash five times to indicate the change. If the sequence is set to ON, it will begin running to indicate the selection. If it is set to OFF, the parking lights will illuminate without animation.

Step 5 - When you’ve reached the desired setting, turn the headlight switch off. If the high beams stay on, wait 10-15 seconds for them to shut off automatically. When all lights have shut off, the configuration will be saved and you have exited programming mode. Repeat this process to select a new configuration.

High Beam Boost Programming (Elite Max Only)

The High Beam Boost (HBB) feature is a supplemental high beam, which can be configured to turn on any time your high beams are activated. Please check state and local laws for suitability prior to enabling this feature.

Step 1 - Turn all lights off, including the off-road switch (if applicable).

Step 2 - Quickly toggle the headlight dial between OFF and PARK six times, leaving it on park the sixth time. 

Step 3 - The DRL will flash six times to indicate you have entered programming mode 6. The current configuration will be displayed.

Step 4 - Using the stalk on your steering wheel, flash your high beam to turn the high beam boost feature off or on. It is off by default. The DRL will flash six times to indicate the change. The high beam boost LED pod will turn on or off to indicate the current setting.

Step 5 -  When you’ve reached the desired setting, turn the headlight switch off. If the high beams stay on, wait 10-15 seconds for them to shut off automatically. When all lights have shut off, the configuration will be saved and you have exited programming mode. Repeat this process to select a new configuration. 

Low Beam Assist Programming (Elite Max Only)

The Low Beam Assist (LBA) feature is a supplemental low beam, which adds width to the low beam pattern. It can be configured to turn on automatically with low beams while turning (cornering), or not at all based on your desired light output while driving.

NOTE: The cornering setting will activate the Low Beam Assist with steering angle (mid and premium trims) or with turn signal function (base trims).

Step 1 - Turn all lights off, including the off-road switch (if applicable).

Step 2 - Quickly toggle the headlight dial between OFF and PARK seven times, leaving it on park the seventh time. 

Step 3 - The DRL will flash seven times to indicate you have entered programming mode 7. The current configuration will be displayed.

Step 4 -  Using the stalk on your steering wheel, flash your high beam to change the setting. The LBA is on full-time with the low beam by default. The DRL will flash seven times to indicate the change, and then display the feedback as listed, to indicate the selected setting.

Step 5 - When you’ve reached the desired setting, turn the headlight switch off. If the high beams stay on, wait 10-15 seconds for them to shut off automatically. When all lights have shut off, the configuration will be saved and you have exited programming mode. Repeat this process to select a new configuration. 

Show Mode Programming (Elite Max Only)

Step 1 - Turn on the off-road switch.

Step 2 - Quickly toggle the headlight dial between OFF and PARK three times, leaving it on park the third time.

Step 3 - Show mode will begin. Show mode will always start by displaying the welcome sequence on a loop. 

Step 4 - Using the stalk on your steering wheel, flash your high beam to cycle through show mode options as shown.

Step 5 - To exit show mode, turn the off-road switch off. 

Factory Reset

If you encounter any unplanned behavior in the functionality or settings of your lights, we would suggest completing the factory reset sequence, and reprogramming as desired. 

Step 1 - Turn all lights off, including the off-road switch (if applicable).

Step 2 - Quickly toggle the headlight dial between OFF and PARK fifteen (15) times, leaving it on park the final time. 

Step 3 - The turn signal bars will flash white twice, then amber twice, to indicate a successful factory reset.

Step 4 - Shut all lights off, then proceed with programming again as desired.

Questions About the Programming?

If you have any questions or issues programming the Elite LED Headlight in your Ford F-150, please contact us for further assistance.

Where Can I Buy Elite LED Headlights?

If you’re ready to upgrade your 2021-2023 Ford F-150 with Elite LED Headlights, you can purchase them by clicking here or using our dealer locator to find a dealer near you. 

Want to know more about Diode Dynamics products? Visit DiodeDynamics.com and subscribe to our newsletter for new product releases and more!

This Programming Guide is for the following SKUs: DD5167, DD5168